|
|
|
|
|
|
| |
|
|
|
|
| |
General information |
|
| |
| Name |
Leitl Beton GmbH
|
|
| Country installed |
Austria
|
|
| Address |
Hörsching
|
|
| Industry sector, NACE code |
C23 - Manufacture of other non-metallic mineral products
|
|
| Solar thermal system owner / operator |
Leitl Beton GmbH
|
|
| Solar thermal engineering company |
|
|
| Process integration engineering company |
|
|
| Year of operation start |
2010
|
|
| |
Technical parameters |
|
| |
| Collector technology |
flat plate collector
|
|
| Collector name |
|
|
| Installed collector area (gross), m² |
315.0
|
|
| Installed collector area (aperture), m² |
|
|
| Installed collector area (absorber), m² |
|
|
| Installed thermal power (estimated), kWth |
220.5
(Default value calculated by multiplying the gross collector area by 0.7 kWth/m²)
|
|
| Solar collector loop heat transfer fluid |
water/glycol
|
|
| Solar energy storage |
short-term water storage
|
|
| Storage volume, m³ |
36.0
|
|
| Kind of conventional heat source |
hot water boiler
|
|
| Kind of fuel used |
biomass
|
|
| |
Process |
|
| |
| Solar thermal energy used for |
Drying of prefabricated concrete components
|
|
| Unit operation |
drying
|
|
| Point of Solar Heat Integration |
A3) Heating of supply heat storage
|
|
| --> Integration how and where |
A deep analysis of the processes was done which showed that that the temperature levels required are mostly below 45°C which are ideal conditions for the use of solar process heat.
|
|
| --> Temperature range process |
|
|
| --> Temperature range solar loop (min/max), C° |
|
|
| |
Economic parameters |
|
| |
| Total investment costs (excl. VAT), € |
133,875.00
(Turnkey costs including solar collectors, piping, support construction, storage, design, commissioning reduced with subsidies)
|
|
| Solar loop (excl. VAT), € |
(Solar collectors, piping, support construction)
|
|
| Solar energy storage (excl. VAT), € |
|
|
| Others (excl. VAT), € |
(Design, commissioning, others)
|
|
| Process integration (excl. VAT), € |
|
|
| Subsidy, € or % of total investment costs |
58905.0
|
|
| Cost for fuel replaced, €/MWhfuel |
|
|
| Calculated solar thermal system life time, a |
0
|
|
| Annual useful solar heat delivery, MWh/a |
|
|
| Specific annual useful solar heat delivery, MWh/am² |
|
|
| Specific investment costs, €/m² |
425.0
|
|
| Solar fraction, % |
|
|
| |
Lessons learned |
|
| |
| Initiative |
|
|
| Integration methodology |
|
|
| Crucial Interfaces |
|
|
| Construction / Commissioning |
|
|
| Operation / Performance |
|
|
| Recommendations |
|
|
|
|
| |
|
|
|
|
|
SHIP Plants
